A
B
C
D
E
F
G
H
I
89
2420333140 E06.13
EN
Telescopic machines, 28 - 43 m
C
- Maintenance
3 - Maintenance sheets
Each specific procedure is described in the following maintenance instructions.
Before performing any maintenance interventions, place the machine in maintenance configuration.
Report that the machine is under maintenance by tagging the platform and ground control boxes.
Using the machine during maintenance is strictly forbidden.
Return the machine to operating configuration after maintenance has been completed.
N.B.
-:-For Russia and the Ukraine only : All the fillings, drain and lubrication points (tanks caps, engines
drain plugs, ...) are red.
3.1 -
PLACING THE MACHINE IN MAINTENANCE CONFIGURATION
3.2 -
PLACING IN OPERATING CONFIGURATION
1.
Remove the turntable rotation locking pin.
2.
Pull the emergency stop button.
3.3 -
GENERAL POINTS
3.3.1 - Recommendations on the conditions of maintenance
• Your safety and the safety of the people around are essential. The handling of parts must be carried
out using appropriate equipment (Chains, Lifting slings, Lifting anchors, ...).
• Keep the elements of the machine in configuration of maintenance thanks to mechanics devices
(Supports, ...).
• Make sure the work area is clean in order to not to pollute the system of the machine.
• Plug the end of any hoses removed, and cap any open ports to prevent contamination during
maintenance.
1.
Place the machine on firm, level ground.
2.
Stow the machine completely.
3.
Push the emergency stop push-button to cut off the
electricity supply.
4.
Insert the turntable rotation locking pin.
Summary of Contents for H28TJ+
