A
B
C
D
E
F
G
H
I
11
4000328850
E 12 14
USA / GB
HA32PX - HA100JRT - HA41PX-NT - HA130JRT-NT
A
- Foreword
2 - Safety
2.1 - S
AFETY
INSTRUCTIONS
2.1.1 - Misuse Hazards
• Do not attach overhanging loads when raising or lowering the platform.
• Do not tie the boom or platform to an adjacent fixed or mobile structure.
• Do not use/operate the machine when alone. Survey person or immediate Supervisor must
be present at ground in case of emergency.
• Do not use a faulty or poorly maintained machine. Remove defective/damaged machine
from service.
• Do not climb onto the compartment covers of the machine.
• Do not replace items critical to machine stability with items of different weight or specification.
• Do not replace factory-installed tires/tyres with tires of different specification or ply rating.
• Do not alter or disable machine components that in any way affect safety and stability.
• Do not disable the safety devices.
2.1.2 - Falling Hazards
• Do not use the machine for any other purpose than to position people,
their tools and material to the overhead/elevated temporary work places.
• Do not use the machine as a crane, material lift or elevator. Only use the
machine as it was intended.
To enter or exit from the platform :
• The machine must be completely stowed.
• Face the machine to access the entry opening to the platform.
• Keep 3 points of contact (both hands and a foot) on the steps and
the guardrail.
Before commencing operation :
• Ensure that guard rails are correctly installed and secured.
• Ensure that gate or sliding bar is in it’s proper closed position.
• Remove oil or grease from the steps, floor, handrail and the guardrails.
• Clear the platform floor free of debris.
When in the platform :
• Occupants must wear harness in accordance with governmental
regulations.
• The correct use of the harness requires the lanyard to be connected to
an anchorage point designated by the decals. Refer to this decal
located on the platform.
• Hold on securely to the guardrails.
307P216290 b
x 1
Summary of Contents for HA100JRT
Page 2: ...2 4000328850 E 12 14 USA GB HA32PX HA100JRT HA41PX NT HA130JRT NT...
Page 8: ...8 4000328850 E 12 14 USA GB HA32PX HA100JRT HA41PX NT HA130JRT NT A Foreword Notes...
Page 22: ...22 4000328850 E 12 14 USA GB HA32PX HA100JRT HA41PX NT HA130JRT NT A Foreword Notes...
Page 118: ...118 4000328850 E 12 14 USA GB F Maintenance HA32PX HA100JRT HA41PX NT HA130JRT NT Notes...