72
4000328850
E 12 14
USA / GB
D
- Operation instructions
HA32PX - HA100JRT - HA41PX-NT - HA130JRT-NT
1.4 - O
PERATION
OF
OVERRIDING
SYSTEM
FROM
GROUND
CONTROL
BOX
Symbol
Description
Machine switched on :
• Rapid flashing : When the platform control box has not been selected or the upper or ground emergency stop is
pressed (machine switched on but control box inactive)
• Constantly on : When the machine is switched on
Foot pedal switch :
• Constantly on : "Enable switch" pedal activated and validated
Faults :
• Rapid flashing : If a fault is active (current fault)
Overload (If machine equipped with weighing system) :
• Rapid flashing : Faulty weighing / overload system
• Illuminated in case of overload
Dumping / Tilt (if fitted) :
• Permanently on in case of tilting, machine folded or unfolded
Radius limitation
• Flashing : Calibration fault or automatic reach limitation
• Permanently lighted : Movement disabled by the reach limitation system
• Constantly on : Valid load selection
• Flashing : If the machine leaves the 450 kg zone with the selector on 450 kg
1
1. If machine equipped with dual load
• Constantly on : Valid load selection
• Flashing : If the load selection is changed to 450 kg in the 230 kg zone
2
2. If machine equipped with dual load
Cage compen/- 10° :
• Permanently lighted if the angle of the platform reaches +/- 10° in relation to the horizontal and movement control
Low fuel level
Combustion engine pre-heating :
• Illuminated while engine is pre-heating
• Off if engine started and if post-heating
Engine warning :
• Lighted in case of minor engine fault (e;g. water in the diesel, clogged air filter, etc.)
• Lighted or flashing in case of fault managed by the engine ECU
Engine shutdown :
• Lighted in case of major engine fault (e.g. engine overheating, oil pressure, alternator fault, etc.)
• Lighted in case of faults managed by the engine ECU
DPF regeneration required :
• Permanently lighted if the particle filter requires regeneration with a high clogging level
3
3. If engine quipped with Particulate Filter Regeneration
DPF regeneration in progress, high temperature in the exhaust system ( HEST )
4
4. If engine quipped with Particulate Filter Regeneration
DPF regeneration inhibited
5
5. If engine quipped with Particulate Filter Regeneration
Please refer to paragraph
D.4.2 To rescue operator from platform.
230 kg
500 lbs
450 kg
1000 lbs
0°
0°
Summary of Contents for HA100JRT
Page 2: ...2 4000328850 E 12 14 USA GB HA32PX HA100JRT HA41PX NT HA130JRT NT...
Page 8: ...8 4000328850 E 12 14 USA GB HA32PX HA100JRT HA41PX NT HA130JRT NT A Foreword Notes...
Page 22: ...22 4000328850 E 12 14 USA GB HA32PX HA100JRT HA41PX NT HA130JRT NT A Foreword Notes...
Page 118: ...118 4000328850 E 12 14 USA GB F Maintenance HA32PX HA100JRT HA41PX NT HA130JRT NT Notes...
