82
4000328850
E 12 14
USA / GB
D
- Operation instructions
HA32PX - HA100JRT - HA41PX-NT - HA130JRT-NT
4.2.2 - For front axle extension
Use E3 and E4 levers (Refer to figure b).
1.
Lower lever ( E3 ).
• The outrigger cylinder is lowered (extended).
• The chassis is lifted.
• The wheels no longer touch the ground.
2.
Keeping lever ( E3 ) lowered and lowering lever ( E4 ) will extend the rear axle.
Once the rear axle is fully extended :
3.
1 to 2 s after the buzzer stops, release lever ( E4 ).
4.
Lift lever ( E3 ).
• The outrigger cylinder is raised (retracted).
• The chassis is lowered.
• The wheels touch the ground.
F i g u r e b
• If the two outrigger cylinders are extended, the axle extension controls are de-activated.
• Always extend the axles before using the machine.
While the axle is being extended, the buzzer sounds and driving is deactivated. The buzzer stops when the
axle is totally extended and the outrigger cylinder is completely raised (retracted).
If the buzzer sounds during the movement, the axles are either not fully extended or not fully retracted.
Summary of Contents for HA100JRT
Page 2: ...2 4000328850 E 12 14 USA GB HA32PX HA100JRT HA41PX NT HA130JRT NT...
Page 8: ...8 4000328850 E 12 14 USA GB HA32PX HA100JRT HA41PX NT HA130JRT NT A Foreword Notes...
Page 22: ...22 4000328850 E 12 14 USA GB HA32PX HA100JRT HA41PX NT HA130JRT NT A Foreword Notes...
Page 118: ...118 4000328850 E 12 14 USA GB F Maintenance HA32PX HA100JRT HA41PX NT HA130JRT NT Notes...
