88
4000328850
E 12 14
USA / GB
D
- Operation instructions
HA32PX - HA100JRT - HA41PX-NT - HA130JRT-NT
• If the E-stop button ( 15 ) or a safety device do not allow normal movement from the ground
control box, the overriding system is operated as follows :
• Break the seal.
• Lift the cover on switch ( 245 ).
• Hold switch upwards to by-pass the safety device.
• Simultaneously, maintain overriding switch ( 245 ) in addition to desired function switch
to obtain movement of the extending structure.
ONLY in these conditions, activate the "overriding system" switch ( 245 ) located under the
sealed cover and simultaneously press the platform lowering button until the safety
mechanisms are deactivated (alarms stop) and therefore normal movements are possible
again, or until the operator can be rescued.
" O v e r r i d i n g s y s t e m " s w i t c h u n d e r s e a l e d
c o v e r
Once rescue operations are complete, report the incident and put a new seal. IMPORTANT :
if the seal is missing, this is considered to be abnormal use of the machine.
7.3 - N
O
POWER
AVAILABLE
In case of loss of the main power source and the secondary power unit, do not attempt to
perform movement using hydraulic manifold without having been trained by HAULOTTE
Services®. All safety functions are shut down and several hazards can occur. Improper use
of the equipment will result in death or serious injuries.
If the operator cannot be lowered by any of the above mentioned methods, contact HAULOTTE Services®
immediately.
Summary of Contents for HA100JRT
Page 2: ...2 4000328850 E 12 14 USA GB HA32PX HA100JRT HA41PX NT HA130JRT NT...
Page 8: ...8 4000328850 E 12 14 USA GB HA32PX HA100JRT HA41PX NT HA130JRT NT A Foreword Notes...
Page 22: ...22 4000328850 E 12 14 USA GB HA32PX HA100JRT HA41PX NT HA130JRT NT A Foreword Notes...
Page 118: ...118 4000328850 E 12 14 USA GB F Maintenance HA32PX HA100JRT HA41PX NT HA130JRT NT Notes...
