WinTV-DVB / NEXUS Installation and Reference Manual
43
Tuner-Status
Synchronization:
It indicates whether a DVB signal is detected.
Signal quality:
This displays the quality of the received signal. A value of 100 % shows a
faultless reception. (Bit fault rate better than 10 -4 )
Signal strength:
The level of the received signal as a percentage. With the aid of this
value, the alignment of the satellite dish can be more easily optimized.
Acoustic signalization:
The acoustic signalization option gives a verbal output of the signal level
through the sound card.This option is present to further aid the alignment of
the satellite dish.
Tuner Adjustments:
Frequency
.............This allows you to set the transponder frequency.
Symbolrate
............This allows you to set the symbol rate that is being broad-
cast. The provider of the service should give the symbol
rate.
H / V
.......................This option allows you to specify the polarization of the
broadcast.
QAM
.......................This setting is only applicable to DVB-c (cable) cards and
is given by the cable operator.
