17
EN
• disconnect the UV lamp connection and remove the lamp
• connect and insert a new UV lamp
• put on the housing and screw it in place
• Install the filter (7) in the air purifier
CAUTION! Never look at a working UV lamp. Your eyesight may be damaged.
fig. 3
6.
The air quality sensor is located beneath the access panel (10). Wipe the access panel and
the air quality sensor grills with a soft brush. Next, remove the access panel and clean the air
quality sensor with a soft swab.
Do this at least every 3 months.
HL-OP-11_instrukcja_v01.indd 17
HL-OP-11_instrukcja_v01.indd 17
13.09.2021 12:33:21
13.09.2021 12:33:21