15 Cleaning
⚠
WARNING
Risk to life from flour dust explosion
Burns, serious injuries, death; material damage to machine and building
Avoid flour dust turbulence.
There must be no ignition sources in the hazardous area.
The entire mill and its surroundings must be cleaned at regular intervals to
remove flour and dust.
⚠
WARNING
Allergic reaction to flour dust
Allergic reaction
If you experience allergic symptoms, seek medical advice immediately.
⚠
WARNING
Pulling in and severing by rotating parts
Injuries to hands and forearms
Do not start up the device without the guard and housing parts.
Do not take hold of the drive belts during operation.
Always switch off the device before commencing cleaning.
i
Cleanliness is a mandatory requirement for hygienic mill production.
Empty the sifting chamber after every milling operation.
Clean the sifting chamber and the brush shafts with a long-handled brush or a va
-
cuum cleaner.
Wipe the wooden parts with a dry cloth or clean them with a vacuum cleaner.
50
Cleaning
Summary of Contents for HM 70
