Haussmann Xpert 59595043, Operator'S Manual

17

SAFETY INSTRUCTIONS

!

Save all warnings and instructions for future reference.

The “power tool” in this instruction refers to your battery-operated (cordless) power 
tool.

1)  Work area safety

     a)  Keep work area clean and well lit. 

Cluttered or dark areas invite 

          accidents.

     b)  Do not operate power tools in explosive atmospheres, such as in the 

presence of flammable liquids, gases or dust. 

Power tools create sparks 

          which may ignite the dust or fumes.

     c)  Keep children and bystanders away while operating a power tool. 

          Distractions can cause you to lose control.

2)  Electrical safety 

     a)  The charger’s plug must match the outlet. Never modify the plug in 

any way. Do not use any adapter plugs with grounded power 

tools. 

Unmodified plugs and matching outlets will reduce risk of electric 

          shock.

b)  Use battery operated tool only with its specifically designated battery 

pack. 

Use of any other batteries may create a risk of fire.

     c)  Do not expose power tools to rain or wet conditions. 

Water entering a 

          power tool will increase the risk of electric shock.                               

     d)  A battery operated tool with integral batteries or a separate battery 

pack must be recharged only with the specified charger for the battery. 

          A charger that may be suitable for one type of battery may create a risk of 

          fire when used with another battery.

3)  Personal safety 

     a)  Stay alert, watch what you are doing and use common sense when 

operating a power tool. Do not use a power tool while you are tired or 

under the influence of drugs, alcohol or medication. 

A moment of 

          inattention while operating power tools may result in serious personal injury.

     b)  Use personal protective equipment. Always wear eye protection. 

          Protective equipment such as dust mask, non-skid safety shoes, hard hat,           

          or hearing protection used for appropriate conditions will reduce personal 

          injuries.

     c)  Prevent unintentional starting. Ensure the switch is in the off-position 

before connecting to power source and/or battery pack, picking up or 

carrying the tool. 

Carrying power tools with your finger on the switch or 

          energizing power tools that have the switch on invites accidents.

     d)  Remove any adjusting key or wrench before turning the power tool on. 

          A wrench or a key left attached to a rotating part of the power tool may 

          result in personal injury.

     e)  Do not overreach. Keep proper footing and balance at all times. 

This 

          enables better control of the power tool in unexpected situations.

WARNING! 

Read all safety warnings and all instructions. 

Failure to follow the 

warnings and instructions may result in electric shock, fire and/or serious injury.

ENGLISH