background image

PNT142-R

22

ENGLISH

TROUBLESHOOTING

PROBLEM

CAUSE

CORRECTION

Air is leaking near the top of the tool or 

the trigger area

Loose screws

Tighten the screws

O-ring is possibly worn out

Replace damaged or worn O-ring

Tool does nothing or operates 

sluggishly

Inadequate air supply

Make sure the air supply is correct

Inadequate lubrication

Place two or three drops of air tool oil 

in the tool’s air inlet

O-rings or seal is worn or damaged

Replace damaged or worn O-rings and 

seals

Air is leaking near the bottom of the 

tool

Loose screws

Tighten the screws

O-ring is possibly worn out

Replace damaged or worn O-ring

Tool is jamming frequently

Incorrect fasteners

Supply approved fasteners of the 

correct size

Damaged fasteners

Replace and discard damaged 

fasteners

Magazine or nose screws are loose

Tighten screws

Magazine is dirty

Clean the magazine

Driver is worn or damaged

Replace damaged or worn 

components

WARRANTY

Thank you for investing in a HAUSSMANN XPERT power tool. These products have 

been made to demanding, high-quality standards and are guaranteed for domestic use 

against manufacturing faults for a period of 36 months from the date of purchase.

This guarantee does not affect your statutory rights. In case of any malfunction of your 

tool (failure, missing part, etc.), please contact one of our service technicians at our toll 

free service line at 1-866-206-0888 from 8 AM to 6 PM, Monday to Friday, Eastern 

time. RONA reserves the right to repair or replace the defective tool, at its discretion.

The product is guaranteed for 36 months if used for normal trade purposes. Any 

guarantee is invalid if the product has been overloaded or subject to neglect, improper 

use or an attempted repair other than by an authorized agent. Heavy-duty, daily 

professional or hire usage are not guaranteed. Due to continuous product 

improvement, we reserve the right to change the product specification without prior 

notice.

REGISTER YOUR PRODUCT

We invite you to register your product online to make future communications easier. 

To do so, simply visit our website www.haussmanntools.com.

Summary of Contents for 68125080























Reviews: