Haussmann 59595028, Operator'S Manual

15

SAFETY INSTRUCTIONS

ENGLISH

      d) Remove any adjusting key or wrench before turning the power tool on.       
           

A wrench or a key left attached to a rotating part of the power tool may 

result in personal injury.

      e) Do not overreach. Keep proper footing and balance at all times. 

This 

enables better control of the power tool in unexpected situations.

      f)  Dress properly. 

Do not wear loose clothing or jewelry. Keep your hair, 

           clothing and gloves away from moving parts. Loose clothes, jewelry or 
           long hair can be caught in moving parts.

4.  Power tool use and care

      a) Do not force the power tool. Use the power tool correctly for your 
           application. 

The correct use will do the job better and safer at the rate for 

which the tool was designed.

      b) Do not use the power tool if the switch doesn’t turn it on & off. 

Any power 

tool that cannot be controlled with the switch is dangerous and must be 

repaired. 

      c) Disconnect the plug from the power source before making any              
           adjustments, changing accessories, or storing power tools. 
           

Such preventive safety measures reduce the risk of starting the 

power tool accidentally.

      d) Store idle power tools out of the reach of children and do not allow 
           persons unfamiliar with the power tool or these instructions to operate 
           the power tool. 

Power tools are dangerous in the hands of untrained users.

      e) Maintain power tools. Check for misalignment or binding of moving 
           parts, breakage of parts and any other condition that may affect the 
           power tool’s operation. If damaged, have the power tool repaired before 
           use. 

Many accidents are caused by poorly maintained power tools.

      f)  Use the power tool, accessories etc. in accordance with these 
           instructions, taking into account the working conditions and the work 
           to be performed. 

Use of the power tool for operations different from those 

intended could result in a hazardous situation.

      g) Do not attempt to modify the power tool in any way. 

The use of any 

attachment or accessory other than those included could result in damage to 

the power tool and injury to the user, including electric shock or injury.

      h) Service should only be carried out by qualified professional
           technicians using original spare parts. 

Failure to do so may result in

          considerable danger to the user.

      i)  Always observe general fire safety precautions when using certain 
           power tools inside your house or workshop. 

It is recommended that you 

have an appropriate fire extinguisher available at all times while working.