18
ENGLISH
ADDITIONAL SAFETY WARNINGS
a) Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring. Contact with a “live” wire will make
exposed metal parts of the tool “live” and shock the operator.
b) Be aware that this tool is always in an operating condition, because it does not
have to be plugged into an electrical outlet.
c) Always be sure you have a firm footing.
d) Be sure no one is below when using the tool in high locations.
e) Hold the tool firmly with both hands.
f) Keep hands away from rotating parts.
g) Do not leave the tool running. Operate the tool only when hand-held.
h) Do not touch the bit or the work piece immediately after operation; they may be
extremely hot and could burn your skin.
i) Some material contains chemicals which may be toxic. Take caution to prevent
dust inhalation and skin contact. Follow material supplier safety data.
a) Before using the charger, read all the instructions and cautionary markings on
the charger and battery pack as well as the instructions on using the battery
pack.
b) Only charge your batteries indoors as the charger is designed for indoor use
only.
c) DANGER. If the battery pack is cracked or damaged in any other way, do not
insert it in the charger. There is a danger of electric shock or electrocution.
d) WARNING. Do not allow any liquid to come into contact with the charger.
There is a danger of electric shock.
e) To allow the battery pack to cool down after charging, do not place it in a hot
environment such as a metal shed or open trailer left in the sun.
f) The charger is not intended for any use other than charging the exact type of
rechargeable battery pack as supplied with the charger. Any other use may
result in the risk of fire, electric shock or electrocution.
g) The charger and battery pack supplied with it are specifically designed to work
together. Do not attempt to charge the battery pack with any other charger than
the one supplied.
h) Do not place any object on top of the charger as it could cause overheating.
Do not place the charger near any heat source.
i) Do not pull on the plug of the charger to disconnect it from the power source.
j) Make sure that the charger cable is positioned where it will not be stepped on,
tripped over or otherwise subjected to damage or stress.
k) Do not use an extension cord unless it is absolutely necessary. The use of an
improper extension cord could cause the risk of fire, electric shock or
electrocution.
l) Do not use the charger if it has been subjected to a heavy knock, dropped or
otherwise damaged in any way. Take the charger to an authorized service
centre for a check or repair.
m) Do not disassemble the charger. Take it to an authorized service centre when
service or repair is required. Incorrect re-assembly may result in the risk of fire,
electric shock or electrocution.
Do not let comfort or familiarity with replace strict adherence to cordless impact
driver safety rules. If you use this power tool unsafely or incorrectly, you can suffer
serious personal injury.
2) Important safety instructions for charger and battery pack
1) Specific safety rules
