23
ENGLISH
MAINTENANCE
1) Charge the battery pack before it is completely discharged. Always stop tool
operation and charge the battery pack when you notice a decrease in tool
power.
2) Never recharge a fully charged battery pack. Overcharging shortens the
battery service life.
3) Charge the battery pack with room temperature at 10°C-40°C (50°F-104°F)
and let a hot battery pack cool down before charging it.
4) Charge the Lithium-ion battery pack when you do not use it for more than six
months.
Cleaning and Maintenance
Tips for maintaining maximum battery life
!
CAUTION !
Place the reversing switch lever (3) into the middle position before
carrying out any tasks on the tool, e.g. changing bits or maintenance, or before
transporting or storing
!
CAUTION!
Place the direction of rotation direction switch into the middle position
before carrying out any tasks on the device, e.g. changing tools or maintenance,
or before transporting or storing the device. Inadvertent operation of the On/Off
switch may result in injury.
Always pull the battery charger out of the mains socket and remove the battery
pack before you clean or maintain the device.
The cordless impact wrench is maintenance-free.
1) Always keep the tool clean, dry and free of oil or grease.
2) Clean the tool immediately after you have finished using it
3) Do not allow any liquids to enter the tool. Use a cloth to clean the housing.
4) Never use petrol, solvents or cleaning agents that might attack plastic.
5) Store the tools, instruction manual and where necessary the accessories in
the original packaging. That way you will always have all the information and
parts on hand.
Do not dispose of electrical appliances with your domestic waste!
1) The packaging is made from environmentally-friendly material.
Dispose of it in your local recycling containers.
2) Take the battery to your nearest authorized service centre or distributor that
has been designated as a battery recycling location.
