Haussmann 59695008, Operator'S Manual

22

 SAFETY INSTRUCTIONS                                                                             

these are connected and properly used. Use of

dust collection can reduce dust related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at

the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and o. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power source

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions

to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition that

may affect the power tool’s operation. If

damaged, have the power tool repaired before

use. Many accidents are caused by poorly

maintained power tools.

f ) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the working

conditions and the work to be performed.

Use of the power tool for operations dierent

from those intended could result in a hazardous

situation.

5) Service

Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the 

power tool is maintained.

Additional safety rules for hand push

blower/vacuum

• Always wear adequate protective clothing 

when operating the tool to avoid injuries to face,

eyes, hands, feet, head or hearing. Use safety

glasses or a face shield, high boots or sturdy

shoes, long pants, work gloves, a hard hat and

ear protection.

• Do not start the tool when it is upside down or

when it is not in the operating position.

• Switch the motor off and remove the plug 

when the tool is not being used, left unattended,

being cleaned, being moved from one place

to another or when the extension cord is

entangled or damaged.

• Do not operate the tool near people, especially

children or pets. Turn it o if they get too close.

Maintain a safe distance of at least 16 ft (5 m) 

from other people when using the tool.

• Never direct the blower tube or blow debris

towards bystanders or pets.

• The operator is responsible for accidents or

hazards occurring to other people or their

property.

• Do not handle the plug or the tool with wet

hands and do not use the tool in the rain.

• Use only outdoor rated extension cords that are

so marked. Keep the extension cord away from

heat, oil and sharp edges.

• Ensure that the extension cord is secured in

a manner that prevents it from disconnecting

from the plug or while in use.

• Keep all the air intakes and the blower tube

free of dust, lint, hair and other material that

may cause a reduction in air flow.

EN