ENGLISH
21
3. Firmly insert the handle into the tube (Fig.4), making sure that the tab is
inserted into the locking hole (Fig. 5)
4. The tube is now fully inserted and ready to be tightened using the handle knob
fastener (Fig. 6)
5. Insert the handle knob fastener and turn clockwise to tighten (Fig. 7)
FASTENING THE SHAFT TO THE MAIN THROWER UNIT
(Fig 8&9)
1. Locate the tube notch slot and align it with the notch track at the opening of
the main thrower unit. Insert the pole into the opening.
2. Secure the tube to the main thrower unit using 2 bolts and nuts.
ASSEMBLY
Figure 4
Figure 6
Figure 7
Figure 5
Figure 8
Figure 9
Tab
Locking hole
Remove screws
Notch Track
Tube Notch Slot
