background image

15

1. 

To start tool: unlock the trigger (A), press button (B) and then press the trigger 

(A); 

2. 

The appliance stops automatically when the trigger (A) is released. 

ADJUSTING SPEED (Fig.8)

The tool has two adjustable speeds. Use speed switch (C) to select the appropriate 

speed for the job:

1. 

“1” position denotes 100-400 RPM

1. 

“2” position denotes 150-700 RPM

ENGLISH

OPERATION

    Unplug tool from power source before doing any maintenance.

    Keep the tool clean: the cleaning of plastic parts can be done with a soft humid 

cloth and a bit of mild soap. Never submerge the appliance and use no 

detergents, alcohol, spirit, etc.   

    Keep the air vents free. Avoid having dirt enter in the appliance.

    The repair of the tool’s internal components required a specialist’ competence.

    If the cable needs replacement, it should be done by the manufacture or his 

agent to avoid danger.

MAINTENANCE

Thank you for investing in a HAUSSMANN XPERT power tool. These products have 

been made to demanding, high-quality standards and are guaranteed for domestic 

use against manufacturing faults for a period of 36 months from the date of purchase. 

This guarantee does not affect your statutory rights. In case of any malfunction of your 

tool (failure, missing part, etc.), please contact one of our service technicians at our 

toll free service line at 1-866-206-0888 from 8 AM to 6 PM, Monday to Friday, Eastern 

time. RONA reserves the right to repair or replace the defective tool, at its discretion.

The product is guaranteed for 36 months if used for normal trade purposes. Any 

guarantee is invalid if the product has been overloaded or subject to neglect, improper 

use or an attempted repair other than by an authorized agent. Heavyduty, daily 

professional or hire usage are not guaranteed. Due to continuous product 

improvement, we reserve the right to change the product specification without prior 

notice.

Register your product

We invite you to register your product online to make future communications easier. 

To do so, simply visit our website www.haussmanntools.com.

WARRANTY

Fig.8

Summary of Contents for EMM104
















Reviews: