Assembly Guide
Placement Guide
Find the Ideal Location
- Place Spray Away™ in area in which animals will cross the Detection Range.
- Place the unit so that the Unit Body is level to the ground, and the Infrared Sensor is
facing the area to be protected.
1.
50 feet
35 feet
35 feet
Detection Range
Spray Distance
Check Spray Away™ Operation (Dry Test: Do NOT attach hose!)
3.
Assemble Step-in-Stake and attach to Unit Body
4.
Stake Spray Away™ into Ground
2.
Attach Sprinkler Head
1.
6
5
Install 4 AA Batteries into Battery Case
2.
Note:
Spray distance varies
as it is directly related to your
hose water pressure.
- Turn Sensitivity Knob on back of unit to level 5.
- Wait 5 seconds, then wave hand in front of Infrared Sensor.
- Spray Away™ will make a "click" or motor sound and Indicator
Light will illuminate. Spray Away™ will reset for 8 seconds
between activation and will not detect motion.
Note: If you do not hear sound, try new batteries and try hooking your unit up to water. If the
problem persists, call us toll-free at 1.855.5.HAVAHART or live chat at www.Havahart.com.
- If ground is too hard or unsuitable for Step-in-Stake,
try wetting ground to soften soil, or stake Spray Away™
in a bucket or flowerpot filled with sand or gravel.
- Do NOT push on top of Sprinkler Head or Unit Body.
- Attach Sprinkler Head by hand to the
top of Unit Body.
- Fully tighten Sprinkler Head by turning
clockwise with the provided plastic
Wrench.
Note: Using tools other than the provided wrench
could damage the unit and result in leaking and
malfunction.
- Battery case is located under Unit Body.
- If Indicator Light is blinking continuously
every 3 seconds, batteries are low.
Note: Indicator Light will flash once when movement
is sensed.
MOS-10290SprayAway5266_2013 3/18/13 11:07 AM Page 5
