10
spirit level and mark the location of 4 holes on the
wall. Drill 4 holes in the wall using a drill adapted
to the diameter of pegs. Insert the pegs into the
holes, then screw securely wall mount bracket
onto the wall. (Figure 3)
4. Place the heater against bracket (Figure 4):
A : Fix the heater on the 2 hooks that are
downwards.
B : Pull the heater upwards whilst keeping it
in the 2 lower hooks.
C : Fix the heater on the 2 hooks that are
upwards.
D : Pull the heater down.
5. Slide the metal slice into the hole, and fasten the
screw to lock the wall mount bracket (Figure 5).
Model no. /
REF.
HT10PCT /
MEDUSA-10
HT15PCT /
MEDUSA-15
HT20PCT /
MEDUSA-20
L(mm)
185
335
335
TECHNICAL SPECIFICATIONS
Model
HT10PCT
HT15PCT
HT20PCT
REF
MEDUSA-10
MEDUSA-15 MEDUSA-20
Rated Voltage
230 V ~
230 V ~
230 V ~
Rated Frequency
50 Hz
50 Hz
50 Hz
Rated Power
1000 W
1500 W
2000 W
