KK-K9-C22-K_INST_6-12.docx rev 2-14
Loosely rear bulkhead to floor with
1/4 x 3/4 Round head Phillips bolts
and flat washers.
Attach rear upper support bracket
To rear bulkhead with 1/4 x 3/4
Round head Phillips bolts.
Place floor on top of floor
brackets. Loosely attach floor to
brackets with 1/4 x 3/4” Carriage
bolts and serrated nuts.
RE: 2014+ Caprice.
Attach rear floor support brackets to
the inboard studs with OEM nuts
previously removed from seat back
.
(outboard studs no longer included on 2014)
Remove rear seat belt assembly.
Attach “B” pillar brackets with 8 mm
x 25 mm Hex head bolt.
One each side.
RE: 2011-2013 Caprice
Attach rear floor support bracket
with OEM nuts previously
removed.
One each side.
Locate 8mm nutsert in upper “B”
pillar.
Temporarily remove lower /
outboard seat back nuts.
(13 mm)