Operation
1. With the Touch Screen Display connected to the Lind Power Supply and the Input Device, press the
Power Button.
2. The Power Indicator will illuminate green (Powered ON Mode).
3. The Touch Screen Display receives data from the system and displays the output on the screen. If
Power Indicator illuminates amber, Touch Screen Display has power (Standby Mode), but is not
receiving signal from input device. Verify Settings on input device (duplicate or extend monitor) or
check connections and retry.
4. Press the Power Button to turn off the Touch Screen Display. Power Indicator is not illuminated.
Using the Touch Screen
1) Tap the screen with your finger or fingers to communicate with the system.
2) Pinch- Zoom Capable Screen
TURNING ON/OFF
USING THE TOUCH SCREEN
1 4
1. When the display is on, press the Power Button to enter Blackout mode. Blackout mode blanks the
screen.
2. A second press of the Power Button will allow the display to resume from the previous state.
ACTIVATING BLACKOUT MODE
1 2
