English
12
PRODUCT OVERVIEW
1. Front Grille
2. Blade nut
3. Blade
4. Grille nut
5. Rear Grille
6. Motor
7. Motor Housing
8. Oscillation knob
9. Control Box
10. Power Plug
11. Screw A
12. Inner pole
13. Screw B
14. Outer Pole
15. Base Cap
16. Base
17. Base nut
18. Remoter control
19. Safety Screw
20. Hook
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
20
19
1. Remove the base nut (17) from the
main pole (14) and insert the main
pole (14) into the base (16) and then
tighten the base nut (17).
2. Unscrew screw B (13) and adjust
height to suit. Re-tighten fixing screw
B (13) once satisfied.
3. Insert the control box (9) into the
inner pole (12) and then fasten with
screw A (11).
4. Remove the rear grille nut (4) from
the motor (6) and secure the rear
grille (5) to the motor (6) using the
three pins and fasten with rear grille
securing nut (4).
5. Put the blade (3) on the motor (6)
and lock it with blade nut (2).
6. Put the front grille (1) into the rear
grille (5), then fasten the safety
screws (19).
MODE
ON/SPEED
OFF
TIMER
Logo size:1.8x0.41mm
Remote control
Control panel
OFF
ON/SPEED
MODE
TIMER
L
M
H
Mode
1
2
4
8
OFF
ON/SPEED
MODE
TIMER
L
M
H
Mode
1
2
4
8
149.7
104.2
46.5
5-
�
10.0
20.0
39.1
40.0
�
10.0
8-
�
2.6
12.9
7.5
7.5
9.6
10.1
7.5
7.5
7.5
30.0
4-17.0
10.0
R14.5
R14.5
R5.0
