AXIS4000
W
HEEL
A
LIGNMENT
S
YSTEM
HAWEKA Wheel Alignment –AXIS4000
46
Articulated trailers
13.2 Setting up the reflector stands for articulated trailers
Put together the reflector stands and then fit the king pin
adapter centrally onto the reflector stand.
There is a cylinder screw in the centre of the re-
flector stand. Place the king pin adapter with
the borehole in the centre of the stand onto the
screw head.
(Fig. 92)
The reflector stand is pushed onto the trailer's king pin
using the king pin adapter and secured with the knurled
screw.
(Fig. 93)
Now fasten it as usual, i.e. both reflectors left and right
onto the reflector stand.
The second reflector stand is set up behind the trailer on
the two tripod stands and is optically aligned.
(Fig. 94)
The procedure for this is as described under Point 9.3.2
Page 30.
Both reflector stands must be optically aligned in such a
way that they stand at rectangles to the long axle of the
vehicle.
(Fig. 94)
(Fig. 93)
(Fig. 92)
Summary of Contents for 924 000 010
Page 2: ......
