Page 23
Section - 2
LIMITATIONS
FAA Approved
Original Issue: Feb 28, 2006
Hawker 850XP Pro Line 21 Airplane Flight Manual
VNAV continued
6. VNAV approach guidance to a DA is not authorized if the reported surface temperature is
below the Baro-VNAV minimum temperature limitation specified on the applicable RNAV
approach procedure chart.
NOTE: Barometric VNAV guidance during approach including the approach transition,
final approach segment and the missed approach procedure is not temperature
compensated.
Operating at uncompensated minimum IFR altitudes will not provide expected
terrain and obstacle clearance for temperatures below ISA.
EGPWS
1. Navigation must not be predicated upon the use of the TAD. The Terrain Display is intended
to serve as a situational awareness tool only and may not provide the accuracy and/or fidelity
on which to solely base terrain avoidance maneuvering.
2. Pilots are authorized to deviate from their current air traffic control (ATC) clearance to the
extent necessary to comply with an EGPWS warning.
3. In order to avoid giving unwanted alerts, the Terrain Awareness alerting must be inhibited by
selecting the TERR INHIB switchlight when within 15 nautical miles of takeoff, approach or
landing at an airport not contained in the EGPWS Airport Database.
Refer to Honeywell document 060-4326-000 for airports contained in the installed EGPWS
Terrain Database.
4. When the FMS is operating in the DR mode, the Terrain Awareness alerting must be inhibited
by selecting the TERR INHIB switchlight.
NOTE: The terrain database, displays and alerting algorithms currently account for limited
cataloged human-made obstructions in North America and Europe.
If obstacle data is not in the database for a particular obstacle, the Obstacle
Awareness alerting is not available for that obstacle.
TCAS II
Pilots are authorized to deviate from their current ATC clearance to the extent necessary to
comply with a TCAS resolution advisory.
If ATC requires the transponder altitude reporting to be disabled, TCAS II must be turned off.
For Training Purposes Only