LIFE
PLUS
MOD3
Owner’s Manual
AM-HLPM3-OM
Rev AB September 2019
12
LCD
Liquid Crystal Display
LED
Light Emitting Diode
TFT
Thin Film Transistor
USB
Universal Serial Bus
OPERATING INSTRUCTIONS
The LIFE
PLUS
MOD3 series of chargers are compatible with batteries at 24, 36, 48 and 72 or
80 volts (depending on the version supplied).
Battery recognition (voltage, capacity and state of charge) is accomplished automatically by the
microprocessor. Several charging profiles are available (Ionic, Gel, Opportunity) based on the
configuration chosen by the operator. If the charger is loaded with the Flex firmware then the
selectable profiles are Flex Fast and Flex Bloc. Furthermore, equalization and compensation
charges are integrated.
The LIFE
PLUS
MOD3 includes an adapter to communicate to a BBWC
™. The BBWC™ is an
advanced battery module that measures, tracks and stores important battery parameters such
as temperature, electrolyte level, voltage and AH throughput. This data is wirelessly transmitted
to the LIFE
PLUS
MOD3 to optimize charging, alerts the operator to battery issues and
safeguards the battery from being permanently damaged.