w w w . h a w k e y e e l e c t r o n i c s . c o m
3. Close the battery door completely by reversing Step 1.
GETTING TO KNOW YOUR HAWKEYE® FISH FINDER
UNDERSTANDING THE VIRTUVIEW™™ LCD DISPLAY
A.
Depth Readout
B.
Sensitivity Setting
C.
Backlight On/Off
D.
Fish Alarm On/Off
E.
Battery Save On/Off
F.
Battery Strength Indicator
G.
Fish Depth Indicator
H.
Bottom Contour Detector
I.
WeedID
®
Weed Detector
J.
Fish Location Indicator
TURNING THE DISPLAY ON/OFF AND SIMULATION MODE
1. To turn the Power On, press the POWER Key.
2. To turn the Power Off, Press and Hold the POWER Key for 3 seconds.
3. During normal operation the screen can be refreshed by pressing the
POWER Key. Use this feature if inconsistent readings are evident.
4. To enter the Simulation Mode hold the POWER key down for 5 seconds
while the power is off. Release the POWER key once the display turns on.
The unit is now in Simulation Mode and must be turned off to enter normal
operation.
N
OTICE
:
The fish finder has an automatic “power-off” feature to prevent
battery drain if you accidentally leave the unit on. When the
depth display reads “---” continuously for 5 minutes, the display
will shut off automatically.
THE SETUP AND ENTER BUTTONS (FEATURE SETUP)
•
Press and Hold the SETUP Key for 3 seconds.
•
The Sensitivity Indicator (
) will blink.