- 12 -
3. Press the
to expand the Sensitivity Menu.
4. Press and release the
button to increase the
sensitivty,
to decrease the sensitivity.
•
Press the
to save the adjustment and exit
the Sensitivity Setup.
•
Press
V | ESC
to cancel the adjustment and exit
the Sensitivity Setup.
5. Press and release the
V | ESC
button 2 times to exit the menu and return
to the fish finder mode.
I
NFORMATION
:
Which setting is the right setting? It greatly depends on the clarity
and/or depth of the water. Very clear water allows for a moderate
sensitivity setting. Conversely, dirty water requires a higher
sensitivity setting to target detail but will increase irritating false
readings. Targeting deep water fish generally requires greater sensitivity,
especially in stained or dirty water. Salt and brackish water also require a
comparatively higher sensitivity setting. While this analysis may seem
confusing, the concept is simple. As the Fish Finder's sensitivity is elevated, a
broader view and smaller details show on the screen. But, with a broader and
stronger view comes more clutter and debris. The clearer the water, the less
sensitivity needed to get accurate details and vice-versa.
B.
ADJUSTING THE DISPLAY BACKLIGHT
Turning the backlight feature ON will keep the screen illuminated all the time.
This feature will greatly reduce the battery life of the Fish Finder, so it should
only be used during low light conditions.
To Adjust the Backlight:
1. Press and Release the
button 1 time (MENU 1
will appear at the top of the screen)
2. Press and release the
button until “Backlight” is
highligted.
3. Press the
to expand the Backlight Menu.
4. Press and release the
button to increase the
backlight,
to lower the backlight.
•
Press the
to save the adjustmen and exit
the Backlight Setup.
