background image

- 8 - 

 

1.  Clear away snow to expose the ice surface. 

2.  Place a small amount of liquid water on the ice and set 

the sonar sensor on the water allowing the Sonar 
Sensor to freeze to the ice.  

3.  If there are any air pockets between the sonar sensor 

and ice, or the water below the ice, the fish finder will 
not work properly and will require you to try another spot, or cut a hole in the 
ice to use.  You can also use the instructions in the  “USING THE FISH 
FINDER THROUGH A BOAT HULL” section.  Be certain not to allow the 
water to freeze around the sensor if you use the “plastic bag” method. 

4.  To remove the sonar sensor from the frozen ice, gently tap the sonar sensor 

at the base with your hand.  If it will not come loose, spray a small amount of 
water on the ice surface around the base and repeat this step until the sonar 
sensor is easily removed. 

 

 

 

 

 

USING THE VARIABLEZONE™ WATER TEMPERATURE SENSOR 

The VariableZone™ Water Temperature Sensor integrated into the sonar sensor 
will allow you to take temperature readings throughout the water column by 
enabling you to adjust the depth of the sensor.   

 

To utilize the VariableZone™ Feature

1.  Increase the distance between the float and the sonar 

sensor. 

2.  After each adjustment, wait 1 minute before observing 

the temperature reading on the display. 

 

 

I

NFORMATION

To increase your catch rate, find the optimal temperature habitat for 
the species you are targeting.  Large changes in temperature may 
indicate an  underwater current that could collect bait fish.  For best 
results, fish your bait near this temperature change and mimic a 

distressed bait that is “caught up in” the current.   

 

 

I

MPORTANT

Never use a blunt object to strike the 
sonar sensor as this may cause damage 
to the sensitive internal components. 

SOLID ICE 

Adjust Distance 

Summary of Contents for FishTrax 1X

























Reviews: