- 15 -
The Menu System Has 3 Tabs:
•
Sonar
•
Setup
•
Advance
To cycle through the Menu System tabs press and release the
button.
In
each menu tab use the
or
buttons
to select a specific menu item,
and use the
or
buttons to change a menu setting, press the
V |
ESC
button
to close the menu system.
A.
ADJUSTING THE DETAIL DISPLAYED ON THE SCREEN
Adjusting the amount of detail shown on the VirtuView™ display is as simple
as adjusting the fish finder’s sensitivity. There are 100 user selectable
sensitivity settings to choose from. Select a higher sensitivity setting to show
smaller sonar returns on-screen, or a lower setting to remove clutter from the
screen. Adjusting Sensitivity also affects how sonar returns are identified as
fish icon symbols
(FishTarget™)
- more fish will be detected at a higher
setting, fewer at a lower setting.
To Adjust the Sensitivity:
1. Press and release the
button 1 time
(SonarI will appear at the top of the
screen)
2. Press and release the
button until the “Sensitivity” box is highligted.
3. Press and release the
button to increase the sensitivty,
to decrease
the sensitivity.