37
You can click ‘PBC’ button few more times to try again. When an access point is
connected, you can click ‘Disconnect’ to disconnect your wireless network card from a
connected access point, or select another WPS-enabled wireless access point, then click
‘Connect’ to establish connection to selected access point, if there are more than one
WPS-enabled access point found. You can also click ‘Rotate’ button, and next access
point on the list will be selected to establish connection.
If you want to delete a found access point from the list, select it and click ‘Delete’ button.
WPS Setup - PIN
If the wireless access point you wish to connect supports PIN, please follow the following
instructions to establish connection to it:
1.
Right-click the Hawking configuration utility icon located at lower-right corner of
computer desktop and then click ‘Launch Config Utility’.
2.
Click ‘WPS Configuration’ menu, and the following settings will appear.
