Power over Ethernet Splitter
The Power over Ethernet Splitter has three connection ports, three LED indicators, and a
voltage adjustment DIP switch.
•
Power + Data-In port:
This is an RJ-45 Ethernet port for data and power
transmission into the PoE Splitter. This port connects to the PoE Injector’s Power +
Data-Out port via an RJ-45 Ethernet cable. The RJ-45 Ethernet cable delivers both
data and power to the PoE Splitter.
Figure 5
. The Splitter’s Power + Data-In port
•
Data-Out port:
This is an RJ-45 Ethernet port and connects to a network device such
as an IP camera via an RJ-45 Ethernet cable. This cable will transmit data to and from
the network device.
•
Power-Out port:
The Power-Out port transmits DC power to a 5V, 7.5V or 12V
network device via the Data Link cable that is included with the packaging.
Figure 6
.
The Splitter’s
Data-Out port, Power Out port, and DIP Switch
8
Summary of Contents for HPOE1
Page 1: ...1 ...
