LED indicators:
There are three LEDs on the top of PoE Splitter. The LEDs are listed
according to power output status: 5V (also Power), 7.5V, or 12V.
Figure 7
. Power and Voltage Status LED Indicators
•
DIP switch:
The DIP switch adjusts the splitter voltage, allowing for the PoE Adapter
to operate with a variety of different PoE-capable network devices, such as IP
cameras, access points, and more. It has three voltage settings: 5V, 7.5V and 12V.
The default setting is 12V. Before adjusting the DIP switch, please remember to
disconnect
the power from the Splitter.
Figure 8
. DIP switch
9
Summary of Contents for HPOE1
Page 1: ...1 ...
