Windows XP
10.
In the Authentication and Security window, please enter in
your network’s security information. If you don’t have this information,
please request it from your network administrator who set up your
network.
WEP Encryption
a.
Select 64-bit or 128-bit
b.
Passpharse - this is case
sensitive and contains no more
than 16 alphanumeric characters.
( Must be the same as your
network).
c.
64-bit WEP key: exactly 10
hexadecimal characters and must
be the same as your network.
128-bit WEP key: exactly 26
hexadecimal characters and must
be the same as your network.
WPA
Encryption
a.
Encryption Type: Select TKIP or AES
b.
All Encryptions must match the selected network’s encryption
settings.
c.
Pre-shared Key: Should be 8-63 characters and must match your
network.
WPA2
Encryption
a.
Enter Pre-shared Key (should be 8-63 characters and must match
your network). After you are done entering the
selected Network Encryption, click OK and proceed.
Congratulations! You have completed the Windows XP
installation.
If your network is set to ASCII, go to
the Authentication Type and select
ASCII from the drop down menu.
- page 12 -
Setup Instructions: Windows XP
Setup Instructions: Windows XP
- page 11 -
Untitled-1 13
9/15/2008 4:47:03 PM
