24
f. Sprocket
Check the sprocket on signs of wear. If wearing is important,
replace it with a new one. Do not install a chain on a worn or
damaged sprocket. Do not install a worn chain on a pinion.
g. Spark plug
Clean the electrodes with a wire brush and set the gap to
0.6mm if necessary.
h. chain saw
Check each time the cutter and cutting angles are as shown
below.
i. Sharpening of the chain
For best performance, we strongly recommend that you
periodically sharpen the chain. The chain can either be
sharpened by a professional or by yourself by providing you
with a sharpening guide (make sure you know how to use it).
The chain must be sharpened when:
- Wood chips have become powder
- To perform a normal cut, force on the tool#
- The cut is not straight
- Vibration increase
- Fuel consumption has increased
- Sharpening method:
