01/21 1210 Series Bottle Fillers
Page 7 of 17
F. GENERAL OPERATION
F.1. USING THE BOTTLE FILLER
•
Insert a bottle below the nozzle to activate the water flow.
•
Remove the bottle from below the nozzle to stop the water flow.
F.2. FILTER LIFE (Filtered units only)
•
The filter is designed to last for a maximum of 1 year or 3,000 gallons, whichever comes first.
•
In order to ensure dispensed water quality, the unit will automatically disable water flow when the
filter reaches 3,000 gallons. Water flow will be re-enabled after the filter is replaced.
F.3. SMART ENERGY SAVING
•
These units are set to Smart Energy Saving as the factory default. These units will automatically
save energy by turning off the chiller when there has been no recent use of the unit.
G. NOTIFICATIONS
G.1. INDICATION LIGHTS (VISIBLE AFTER REMOVING THE SKIRT)
•
Power
= Red LED
o
Solid ON
– when power is applied
•
Filter
= Blue LED (Filtered units only)
o
Solid ON
– Filter life 100% to 11% remaining
o
Intermittent Flash (once/3 second)
– Filter life 10% to 0% remaining
o
Rapid Flash (once/second)
– Filter life expired
•
Energy Saving
= Green LED
o
OFF
– Energy Saving Mode disabled
o
Solid ON
– Energy Saving Mode enabled
o
Rapid Flash (once/second)
– Actively saving energy (compressor and fan disabled)
G.2. BOTTLE FILLER INDICATION
•
Bottles Saved:
Indicates approximately 1 bottle saved for each 17oz dispensed.
•
Filtering Icon (Filtered units only):
o
Solid ON at all times - 100%-11% filter capacity remaining
o
Pulsing when not activated - 10%-1% filter capacity remaining
o
OFF - 0% filter capacity remaining (filter expired)
•
Energy Efficiency Icon
o
Solid ON = Basic or Programmable Energy Saving Mode enabled
o
Intermittent Flash = Unit actively saving energy (compressor and fan disabled)
o
OFF = Energy Saving Mode disabled
