AVAILABLE ARM HEIGHTS
B
32-3/4" / 832mm
CLEARANCE
KNEE
A
DIM
A
ADULT ADA
27" / 686mm
FINISHED GRADE
29-3/4" / 756mm
CHILD ADA
24" / 610mm
OUTLET
TO SPOUT
B
NOTES:
1
PROCEDURE FOR ASSEMBLING ARM TO PEDESTAL:
IMPORTANT:
L-BRACKETS ARE PRE-ASSEMBLED AND
MUST NOT
BE
LOOSENED FOR ANY REASON.
STEP 1:
ATTACH ENTIRE ARM ASSEMBLY TO MOUNTING PLATE ON PEDESTAL
USING 3/8"-16 X 1" BOLTS AND WASHERS (SUPPLIED) AND TIGHTEN SECURELY
IN PLACE.
STEP 2:
(OPTIONAL) APPLY CAULKING AS NEEDED TO FILL ANY GAP PRESENT
BETWEEN ARM AND PEDESTAL.
2 SIDE ARM IS ADJUSTABLE TO ACCOMODATE EITHER CHILD OR ADULT
HEIGHTS (SEE "AVAILABLE ARM HEIGHTS" CHART).
3 BASED ON DESIRED HEIGHT (CHILD OR ADULT) OF ARM, ORIENT
BACKPLATE AS SHOWN IN FIGURE 1 AND USE APPROPRIATE SHADED
HOLES.
4 WASTE ASSEMBLY IS SUPPLIED DISASSEMBLED. THE SHORTER OF THE
TWO PIECES IS FOR THE ARM DRAIN, AND MUST BE INSTALLED SO THAT
ANY BEND IN THE FLEX TUBING WILL ALLOW WATER TO DRAIN
COMPLETELY. THE LONGER IS FOR THE PEDESTAL DRAIN AND IS SUPPLIED
AT THE LENGTH REQUIRED TO ASSEMBLE THE UNIT WITH THE ARM AT
CHILD HEIGHT. IN ORDER TO ASSEMBLE AT ADULT HEIGHT, 3" MUST BE
CUT FROM THE END OF THE FLEX TUBING PRIOR TO ASSEMBLY. TEE IS
TO BE GLUED TO THE FLEX TUBING WASTE ARMS USING PVC PIPE CEMENT.
FIGURE 1
BACKPLATE
3
CHILD
3
ADULT
4
8"
203mm
CHILD OR ADULT
HEIGHT CONFIGURATION
DETAILS
APPROVED:
DRAWN:
PART NUMBER
SCALE:
SHEET
OF
REVISION
DRAWING TYPE:
SIZE: A
BY:
ECN NO.
PAGE
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
C
R
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
(775) 359-4712 FAX (775) 359-7424
E-MAIL: HAWS@HAWSCO.COM
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
CJL
09/29/92
20
0002077073.D
3150FR
1:13
2
2
MJ
10/23/18
JP
5 o
f 5
INSTALLATION
5362
2018
FV
