40-1/2"
1029mm
514mm
20-1/4"
13"
330mm
26"
660mm
19-1/4"
489mm
22"
559mm
279mm
11"
38-1/2"
978mm
A
A
SECTION A-A
MOUNTING DETAIL
Ø 5/8"
4X
Ø 16mm
HOLE THRU
46-1/2"
1181mm
83"
2108mm
12-7/8"
327mm
27" MIN
686mm
914mm
36"
2318mm
91-1/4"
FLOOR LINE
2184mm
86"
3-7/8"
98mm
90-1/8"
2289mm
2-1/4" (57mm)
RECESS FOR
WHEELCHAIR
ACCESS
1" IPS
SUPPLY
OPTIONAL
1" IPS
SUPPLY
3" DRAIN PIPE
4X 1/2" (12.7mm)
ANCHOR
BOLT ASSEMBLY
18"
DRAIN SHOWER
3" INSIDE CAULK
(SUPPLIED)
(NOT SUPPLIED)
APPROVED:
DRAWN:
PART NUMBER
SCALE:
SHEET
OF
REVISION
DRAWING TYPE:
SIZE: A
BY:
ECN NO.
PA
GE
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
C
R
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
(775) 359-4712 FAX (775) 359-7424
E-MAIL: HAWS@HAWSCO.COM
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
RTM
8/10/01
13
0002080194.D
8605WC
EMERGENCY SHOWER
NA
1
1
MJ
08/07/18
FV
4 OF
4
INSTALLATION
5334
2018
NG
36"
NOTES:
1. WHEN INSTALLING THIS UNIT, LOCAL , STATE, OR FEDERAL CODES SHOULD BE ADHERED TO FOR
INSTALLATION DIMENSIONS (LOCATIONS), WASTE AND SUPPLY REQUIREMENTS OTHER THAN SHOWN.
2. TO COMPLY WITH ANSI Z358.1-2014 FOR EMERGENCY EYEWASH OR EYE/FACE WASH:
EYEWASH OR EYE/FACE WASH SHALL BE POSITIONED SUCH THAT FLUSHING FLUID PATTERN IS NOT
LESS THAN 33" (838mm), NO GREATER THAN 53" (1346mm) FROM SURFACE ON WHICH USER STANDS,
AND 6.0" (153mm) MINIMUM FROM WALL OR NEAREST OBSTRUCTION.
3 SHOWER SHALL BE POSITIONED SUCH THAT SHOWER HEAD IS NOT LESS THAN 82" (2083mm) OR
GREATER THAN 96" (2438mm) FROM SURFACE ON WHICH USER STANDS.
4. SHOWER SPRAY PATTERN SHALL HAVE A MINIMUM DIAMETER OF 20" (508mm) AT 60" (1524mm) ABOVE
SURFACE ON WHICH USER STANDS. CENTER OF SPRAY PATTERN SHALL BE LOCATED AT LEAST 16" (406mm)
FROM ANY OBSTRUCTION.
5. DIMENSIONS MAY VARY ±1/2".
33"-53"
838mm-1346mm
FLOW PATTERN
