Hay PC PORTABLE, Instruction Manual

PA RTS

This product is supplied with an aow voltage LED bulb (3W, 
DC 3.7V). Replacement bulbs must be the same type as 
the one supplied with the product. HAY will not accept any 
responsibility for any accidents or injury that occurs due 

to the use of incorrect bulbs. This product is fitted with a 
rechargable, high-performance lithium-ion battery, 3.7V, 
2600mAh. 

TECHNIC A L DATA

The product must not be modified in any way. HAY accepts 
no responsibility for any products that have been modified or 
tampered with. This lamp is designed for indoor and outdoor 
use. HAY recommends that the lamp is not kept outside 
while raining. This lamp has an integrated high-performance 
lithium-ion battery. When charging the battery use a USB 
power source/driver with low voltage (SELV) output with a 
constant voltage of 5V, according to IEC/EN 61347-2-13. After 
300 charging cycles, it will maintain a capacity of 75% or 
more. To extend battery life, it is recommended to regularly 

charge it with the supplied USB cable. The battery in this 
lamp is non-replaceable. The battery must be removed from 
the lamp and disposed of safely before the lamp is disposed 
of. Before removing the battery make sure that the lamp 
is not plugged into a power source. This lamp has been 
designed to be used in operating temperatures between 
0˚C and 45 ˚C. If this lamp is used outside of this ambient 
temperature range, the battery life may be reduced and this 
may affect the lamp’s performance.

AT TENTION

The product can be cleaned with a soft damp cloth and mild 
detergent.  Do not use alcohol or any other solvents to clean 

the product. Ensure that the power supply has been turned 
OFF before cleaning the product.

C A R E A ND M A INTENA NCE