26
2 5 6 4 B A L E B U S T E R
O P E R A T I N G I N S T R U C T I O N S
1.
The loader has three settings for different size bales. For bales approximately 72" in diameter mount the
loader tines in the outermost position. 60" bales require the loader tines to be positioned in the left outer slot
and the right inner slot (left and right are determined while facing in the direction of travel). 48" bales
require the tines to be positioned in the inner mounting slots (see below)
2.
48” bales use left inner and right inner mounting slots.
60” bales use left outer and right inner mounting slots (standard).
72” bales use left outer and right outer mounting slots.
3.
These settings are accomplished by removing the pivot bolts and removing the tine. After the tine is
reinstalled in the proper position, reinstall the pivot bolt and tighten. Be sure the bolt threads protrude
though the entire nut so that the locking nut functions properly. Do not over tighten the pivot bolt, the tine
should rotate freely about the pivot bolt.
4.
The loader tines should pivot freely as the loader is raised and lowered. If the loader tines don’t swing
down into the loading position the bale will not load properly. With the loader fully raised the loader tines
should swing down.
CAUTION:
Watch for overhead hazards such as power lines.
Tine mounting brackets
loader tine
left inner
left outer
right outer
right inner
Summary of Contents for Balebuster 2564
