32
2 5 6 4 B A L E B U S T E R
O P E R A T I N G I N S T R U C T I O N S
3.4.2
Changing length of cut
Using conveyor speed and slug bar settings to determine material size will reduce the horsepower requirements and
increase flail life. If a greater size reduction is required, then add a smaller screen.
Using a screen will produce a relatively small material size, but will require more horsepower, lower production (tons/
hour), and result in greater flail and screen wear.
3.4.3
Changing screens
Using a screen with a smaller hole will produce a finer cut.
Where a coarse cut is desired, use a screen with a larger hole.
To change screens, perform the following steps:
1.
Open the access door on side of machine
2.
Remove 8 bolts
3.
Slide screen out
4.
Clean screen track
5.
Insert new screen
6.
Replace bolts, and access door
3.4.4
Adjusting the bale conveyor speed
Moving the lever counterclockwise will slow the conveyor,
and make a finer product.. Moving the lever clockwise
will speed up the conveyor and make a coarser product.
For tractors with PFC type hydraulic systems:
This valve should be set in the full open position. Conveyor
speed can be controlled directly from the tractor controls.
bale conveyor speed
control valve
Summary of Contents for Balebuster 2564
