36
2 5 6 4 B A L E B U S T E R
O P E R A T I N G I N S T R U C T I O N S
Section 4: General maintenance
IMPORTANT:
Before performing any service or maintenance on your BALEBUSTER, review the
safety guidelines for performing service and maintenance in section 1.6 “Safety review” under the
heading “
WHEN PERFORMING SERVICE AND MAINTENANCE
”.
4.1
Lubrication
LUBRICATION INSTRUCTIONS
: The operator should make a check of all grease fittings in the unit before
beginning to operate it so as to become familiar with their location and the correct service schedule.
WARNING:
Use normal shut-down procedure (section 3.3.4) before lubricating machine.
Use only a high quality, multi-purpose grease when lubricating the unit. Make sure all fittings and the nozzle of the
grease applicator are clean before applying the grease. If any grease fittings are missing, replace them immediately.
4.1.1
LUBRICATION POINTS
The following grease points will require an eight (8) hour service interval.
•
Idler Pivot - 1 see figure 4.1
•
Transfer auger bearings - 2 see figure 4.1
•
Rotor bearings - 2 see figure 4.1
•
Fan Bearings - 2 see figure 4.2
•
Fan House Pivot - 1 see figure 4.2
Rotating the fan housing to different positions while greasing will help distribute grease better.
•
Universal Joints - 2 see figure 4.3
•
Telescoping Shaft - 1 see figure 4.3
•
Driveline Support Bearings - 1 see figure 4.3
Summary of Contents for Balebuster 2564
