Connections
Connecting an Audio Equipment
When using an amplifier, connect the Output L/MONO and R
jacks on
the rear panel to the input jack of the amplifier.
Note:
Turn off the power of all devices before you make connections.
For mono playback, use the L/MONO jack.
For stereo playback, connect both L/MONO and R jacks.
The line output volume is controlled by the VOLUME knob.
Connecting a set of Headphones
An optional set of stereo headphones can be connected to the
PHONES jack located on the rear panel of the drum module.
The headphones output volume is controlled by the VOLUME knob too.
Connecting an MP3/CD Player
Connect the audio output of an MP3/CD player or other audio source to
the stereo AUX IN jack on the rear panel.
The input signal is mixed with the drum signal, allowing you to play
along.
Connecting a Computer
By connecting a computer to the USB terminal, you can transfer MIDI
data between the module and the computer.
Power Supply & Switch
Connect the power adaptor to the DC IN jack on the rear panel. After
confirming that all connections have been completed, rotate the volume
knob to the left (minimum volume level) before switching the power on.
Press the [POWER] button to turn on the power.
AUTO POWER OFF
The digital drum will automatically turn off the power, if there is no
operation for about 30 minutes.
Press the [START/STOP] button and then turn on the power to switch
off the auto power off function. It will display “PoF” for a while.
6
0
5
25
75
95
100
aw_DD401_Manual_G02_130717
2013� � 7� � 17� � 10�54�0�
Summary of Contents for dd105
Page 1: ...dd105 VOLUME...
Page 24: ...GM Backing Instrument List 24...
Page 27: ...MIDI Implementation Chart 27...
Page 28: ...DD 105...
