background image

Notice:  

This gazebo / pergola is intended as a temporary shade structure, not a permanent structure.  
As a result the canopy / top must be removed during heavy rain, winds, or inclement weather 
including but not limited to thunderstorms, hurricanes, snow , and sleet.  

Failure to do so will risk damage to the canopy / top and the structure of the unit itself.  
Damage occurred to the unit from not removing the top is not covered by the manufacturer.

1) Keep all flame and heat sources away from this tent fabric. This tent is made with fabric  
    that meets CPAI-84 specifications for the flame resistance. It is not fire proof. The fabric  
    will burn if left in continuous contact with any flame source. The application of any 
    foreign substance  to the tent fabric may render the flame-resistance properties ineffective.

2)  When assembling and using this product, basic safety precautions must always be followed 
     to reduce the risk of personal injury and damage to product or surroundings. Do not cook

3)  

4) Garden house fabrics are water resistant but not waterproof and may leak during
    precipitation. Fabrics will fade from direct exposure to sunlight. 

     or barbeque under the canopy.

3/10

MAINTENANCE

 

AND CARE

 

TIPS

 

 A

L

O

G

R

E

P

 

R

O

F

Please properly tighten all hardware and perform periodic inspections during usage for 

    cracked welds or loose nuts or bolts.

5)

Summary of Contents for PACA012-3











Reviews: