background image

15

14

WARRANTY

LIMITED WARRANTY
Hayter Limited 
warrants to the original user/purchaser that this unit shall be free from 

defects in material or workmanship under normal use for a period of two years from 

the date of purchase. To qualify for the full benefit of the warranty, the warranty 

registration card must be returned to Hayter Limited within 14 days of purchase. If the 

selling dealer has not returned the Warranty Registration Card, please complete and 

return. Subject to the conditions and exclusions noted in this limited warranty, we shall 

at our option, repair or replace any warranted part during the applicable period. If you 

are in any doubt or experience any difficulty, please consult a Hayter Authorised 

Service Dealer for clarification. 
A 90 day warranty period applies to those items which are subject to normal wear and 

tear e.g. wheels, cutterblades, cables, grassbags and other consumable wearing parts.
This warranty does not apply to any unit that has been tampered with, altered, misused, 

abused or used for hire, and will become invalid if non genuine Hayter parts are fitted. 

This warranty does not cover minor mechanical adjustments unless they are due to  

defective material or workmanship. Consult the Owner's Handbook or a Hayter 

Authorised Service Dealer for assistance when making these adjustments.
The machines are not warranted for commercial use.
To make a warranty claim, return the unit to a Hayter authorised service dealer along 

with proof of purchase stating the machine serial number and date of purchase. Subject 

to the conditions and exclusions in this limited warranty, the authorised dealer will, at 

our option, repair or replace any warranted part within the duration of the warranty 

period.
This limited warranty gives specific legal rights and is in addition to any statutory 

rights to which you may be entitled and your statutory rights are not affected by this 

warranty. If you need additional information concerning this written warranty, or 

assistance in obtaining services, please write to: Hayter Limited, Service 

Department, Spellbrook, Bishop's  Stortford, Hertfordshire, CM23 4BU
UK ONLY
: Details of your local Hayter authorised dealer are contained in The Yellow 

Pages or contact:- Freephone 0800 616298: or visit the Hayter website at 

www.hayter.co.uk

Issue: 01.09.09 

NOTES

Summary of Contents for Envoy 36 100E

















Reviews: