IMPORTANT SAFETY INSTRUCTIONS
When using this electrical equipment, basic safety precautions
should always be followed, including the following:
•
READ AND FOLLOW ALL INSTRUCTIONS
•
Disconnect all AC power during installation.
•
Warning - To reduce the risk of injury, do not permit children to
use this product unless they are closely supervised at all times.
•
A green colored terminal marked "Earth Ground" is located
inside the wiring compartment. To reduce the risk of electric
shock, this terminal must be connected to the grounding means
provided in the electric supply service panel with a continuous
copper wire equivalent in size to the circuit conductors supplying
the equipment.
•
WARNING - Risk of Electric Shock. Connect only to a ground-
ing type receptacle protected by a ground-fault circuit-interrupter
(GFCI). Contact a qualified electrician if you cannot verify that
the receptacle is protected by a GFCI.
•
Do not bury cord. Locate cord to minimize abuse from lawn
mowers, hedge trimmers, and other equipment.
•
WARNING - To reduce the risk of electric shock, replace dam-
aged cord immediately.
•
WARNING - To reduce the risk of electric shock, do not use ex-
tension cord to connect unit to electric supply; provide a properly
located outlet.
•
One bonding lug for US models (two for Canadian models) is
provided on the external surface. To reduce the risk of electric
shock, connect the local common bonding grid in the area of the
swimming pool, spa, or hot tub to these terminals with an insu
-
lated or bare copper conductor not smaller than 8 AWG US / 6
AWG Canada.
•
All field installed metal components such as rails, ladders,
drains, or other similar hardware within 3 meters of the pool, spa
or hot tub shall be bonded to the equipment grounding bus with
copper conductors not smaller than 8 AWG US / 6 AWG Cana-
da.
•
SAVE THESE INSTRUCTIONS
1
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
