Hayward KingShark, Owner'S Manual

KingShark2

4

REMOVE THE UNIT IMMEDIATELY AFTER USE.

ALLOWING UNIT TO COOL IN WATER AFTER 

RUNNING CAN CAUSE MOTOR SEAL DAMAGE.

To clean the cartridge filters #7807 (Page 10, Key 7) remove the filter housing 
assembly #3400 (Page 10, Key 13) by removing the filter knob and releasing the 
filter box.

Cleaning the filters after each use is an important part of maintaining your King-
Shark2. Clean filters will allow the machine to function most efficiently.

Disassemble the filter housing assembly #3400 (Page 10, Key l3) by removing the 
four (4) filter knobs #3405 (Page 10, Key 3) The filter backplate #3416 (Page 10, 
Key 10) and filter cartridges #7807 can then be removed.

Clean cartridges with a water hose using a pressure nozzle.

Use the KingShark2 on a regular basis to keep your pool clean.

MOTOR INFORMATION

The Motor in your KingShark2 has automatic overload protection. The overload 
switch will protect the motor against burning out when an obstruction stops the 
machine. When an obstruction stops the machine, UNPLUG THE CORD FROM 
THE OUTLET and remove the unit from the pool. Turn the machine over and 
with the aid of a long screw driver or needle-nose pliers, rotate the impeller and 
dislodge any foreign object. All large objects should be removed from the pool 
before the KingShark2 is put into operation.

4.

5.

6.

7.

8.