USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
6
Securing Universal ColorLogic/CrystaLogic light
The Universal ColorLogic/CrystaLogic Light offers a unique tool-less installation when used with the LFGUY1000 niche. For complete installation instructions includ-
ing removal of the Universal ColorLogic/CrystaLogic light, refer to the light manual.
To prepare for installation, remove the mounting screw and spacer from the top of the light (this will not be needed for installation in the LFGUY1000 niche) and
verify that the twist lock latch is installed (see ColorLogic/CrystaLogic manual). The twist lock latch will allow the light to fasten to the LFGUY1000 housing without
the need for tools. Note that additional twist lock latches are included.
To mount the light, insert it into the niche with the mounting hole located at the 11 o’clock position. Twist the light fixture clockwise until it firmly locks. The mounting
hole should now be at the 12 o’clock position.
Install the trim ring by positioning the Hayward logo at the 11 o’clock position onto the light fixture. Twist the trim ring clockwise until it firmly locks. The Hayward
logo should now be in the 12 o’clock position.
