www.haywardpool.com USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Max-Flo II
™
Series ____ ____ _____ _ Page 2 of 16
IMPORTANT SAFETY INSTRUCTIONS
Before installing or servicing this electrical equipment, turn power supply OFF.
WARNING
–
Read and follow all instructions in this
owner’s manual and on the equipment. Failure to follow
instructions can cause severe injury and/or death.
WARNING –
This product should be installed and serviced only by a qualified professional.
CAUTION –
All electrical wiring MUST be in conformance with all applicable local codes, regulations, and the
National Electric Code (NEC).
Use of non-Hayward replacement parts voids warranty.
ATTENTION INSTALLER – THIS MANUAL CONTAINS IMPORTANT INFORMATION ABOUT THE
INSTALLATION, OPERATION, AND SAFE USE OF THIS PUMP THAT MUST BE FURNISHED TO THE END USER
OF THIS PRODUCT. FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS COULD RESULT IN SERIOUS
INJURY.
WARNING
–
To reduce risk of injury, do not permit children to use or climb on this product. Closely supervise children
at all times. Components such as the filtration system, pumps, and heaters must be positioned to prevent children from using them as a
means of access to the pool.
CAUTION
–
This pump is intended for use on permanently installed swimming pools and may also be used with hot tubs
and spas if so marked. Do NOT use with storable pools. A permanently installed pool is constructed in or on the ground or in a
building such that it cannot be readily disassembled for storage. A storable pool is constructed so that it is capable of being readily
disassembled for storage and reassembled to its original integrity.
Though this product is designed for outdoor use, it is strongly advised to protect the electrical components from the weather. Select a
well-drained area, one that will not flood when it rains. It requires free circulation of air for cooling. Do not install in a damp or non-
ventilated location. If installed within an outer enclosure or beneath the skirt of a hot tub or spa, adequate ventilation and free circulation
of air must be provided to prevent overheating of the motor.
WARNING
–
Pool and spa components have a finite life. All components should be inspected frequently and replaced at
least every ten years, or if found to be damaged, broken, cracked, missing, or not securely attached.
Basic safety precautions should always be followed, including the following: Failure to follow instructions may
result in injury.
This is the safety-alert symbol. When you see this symbol on your pump or in this manual, look for one of the
following signal words and are alert to the potential for personal injury.
WARNING
warns about hazards that
could
cause serious personal injury, death or major property
damage and if ignored presents a potential hazard.
CAUTION
warns about hazards that
will
or
can
cause minor or moderate personal injury and/or property
damage and if ignored presents a potential hazard. It can also make consumers aware of actions that are
unpredictable and unsafe.
The
NOTICE
label indicates special instructions that are important but not related to hazards.
