13
HAZET-WERK
Hermann Zerver GmbH & Co. KG
;
Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[
+49 (0) 21 91 / 7 92-0 •
\
+49 (0) 21 91 / 7 92-400 •
^
hazet.de •
]
export@hazet.de
3
Design and function
7. Malfunctions
• The tool has been tested several times during
production. Should malfunctions nevertheless
occur, please check your tool as follows:
• Check the cable for damage
• Check that the mains plug is plugged in
• Check that the thermal protection switch is acti-
vated. (see section: thermal protection switch)
• Repair work must be carried out exclusively by
authorised persons.
• For customer service, please contact your dis-
tributor or the HAZET Service Centre.
6. Maintenance and care
WARNING!
Pull the mains plug out of the socket
before cleaning.
• Clean the tool with a damp, lint-free cloth.
Make sure that no liquids penetrate the
housing or come into contact with electrical
components. Do not use aggressive clean-
ing agents such as solvents, alcoholic clean-
ers, cleaning sprays etc.
• Dry the tool before commissioning.
Within the EU this symbol indicates
that this product must not be dis-
posed of with household waste.
Old equipment contains valuable
recyclable materials that should be
recycled in order to avoid harm-
ing the environment or human health through
uncontrolled waste disposal.
Please therefore dispose of old equipment via
suitable collection systems or send the tool to
the place where you bought it for disposal. The
latter will then send the tool for recycling.
4
Disposal
Immer persönliche Schutzausrüstung tragen!
Always wear personal protective equipment!
Summary of Contents for 161N-3D
Page 8: ...8 8 Notizen Notes ...
Page 14: ...14 14 Notizen Notes ...
Page 15: ...15 15 Notizen Notes ...