When operating the hydraulic spindle, do not reach into the pulling device
and/or into the lateral housing openings. Otherwise you risk serious injury.
23
1.5 Due to the application, the level housing
g
surface is optimized together with the reduction ring
d
; e.g. housing 4930-721 with reduction ring 4930-6.
1.6 Use one hand to insert the spindle nut
b
and the centering bushing
e
with the attached
thrust washer
f
into the inner bore in the direction in which the wheel bearing is
extracted
‹
.
If the design of the bearing seat is such that dismantling can only be carried out in one
direction, the thrust washer
f
must be replaced by a spacer plate 4930-5
c
.
3
Design and Function
