13
3. Dangers that may arise
from the tool
Before each use, check the HAZET tool for full
functionality. Do not use the tool if its functio-
nal efficiency cannot be ensured or if damage
is detected. If it is determined that the tool is
not in good working order but the tool is used
in spite of this, there is a danger of serious
damage to body, health and property.
• Do not use tools with a defective on/off
switch. Any tools that cannot be switched on
or off with the On/Off switch are dangerous
and must be repaired immediately.
• All service or repair work must be carried out
by qualified personnel only. Only use original
spare parts in order to guarantee its long
term operational safety.
• Do not remove safety tools / guards and/or
housing parts.
• Never operate the tool if a protective cover
is missing or if one or more of the safety
tools / guards are not fitted and in perfect
condition.
• For safety reasons any modification of
HAZET tools is strictly forbidden. Any modi-
fication of the tool will result in immediate
exclusion from express or implied warranty
and liability.
•
Wear working gloves and
safety glasses.
Pneumatic tools can disperse
chips, dust and other abraded
particles at high speed which
may result in severe eye
injuries. Compressed air is
dangerous. The air flow may
cause harm to sensitive parts
of the body such as eyes,
ears, etc. Dust and objects
being raised by the air flow
may cause injuries.
•
Wear hearing protection.
Prolonged expo-
sure to the working noise of pneumatic tools
may result in permanent hea-
ring loss.
•
Wear a face mask or brea-
thing protection.
Breathing
in the vapour of some mate-
rials such as adhesives and
tar that contain dangerous
chemicals can, over a longer
period of time, cause serious
harm to the lungs and respi-
ratory tracts.
•
Wear tight-fitting protecti-
ve clothing.
Tools with moving parts can
get caught in your hair, clothes, jewellery,
or other loose objects, which
can lead to serious injury.
Never wear clothing that is
too loose and/or clothing
with bands or loops, etc.
which may get caught in the
moving parts of the tool. During work, take
off jewellery, watches, identification tags,
bracelets, necklaces etc. that could get
caught in the tool. Never touch the moving
parts of a tool. Long hair should be tied back
or covered.
•
Keep children away from pneumatic tools.
Unattended tools or tools that are connected
to the compressed air supply may be used
by non-authorised persons and could injure
them or other persons.
2
For Your Safety
Wear hearing protection!
Summary of Contents for 9033M-11
Page 27: ...27 Notizen Notes ...